EN
11
TECHNICAL DATA
Motor
3 V DC
Flow
≤
5 l/min
Battery LR20
Length, outlet hose
600 mm
Length, suction tube
375 mm
Length, total
625 mm
DESCRIPTION
Battery-driven pump for filling e.g. water,
petrol, diesel, reducer such as AdBlue, as well
as radiator and wiper fluid.
1. Power switch
2. Pump head
3. Battery holder
4. Outlet hose
5. Suction tube
FIG. 1
PARTS AFFECTED BY LIQUID
Polypropylene, polyethylene, nitrile rubber,
stainless steel, polyvinyl chloride (PVC) and
polyoxymethylene.
RECOMMENDED USE
The pump can be used with a variety of liquids
such as petrol, diesel, water and reducing
agents such as Adblue..
NOTE:
The product must never be used for e.g.
acids, acetone or benzene.
HOW TO USE
1. Turn the pump head anti-clockwise.
FIG. 2
2. Insert the batteries (1) as illustrated.
FIG. 3
SAFETY INSTRUCTIONS
• Follow the applicable health and safety
regulations as well as good workshop
practice.
• Wear safety glasses or a safety mask.
• Wear safety gloves to protect your skin
against repeated and prolonged exposure
to the liquids being handled.
• Check the product regularly and replace
damaged and/or worn parts.
• Only use original spare parts. The use of
other parts can result in personal injury
and/or material damage. It will also
invalidate the warranty.
• Keep the product clean and in good
condition for best functionality and safety.
• Use the product only for its intended
purpose.
• Do not expose the product to knocks and
blows, or to careless handling.
• Do not carry the product by the hose.
• Do not use the product if it is defective or
damaged, or if parts are missing.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Summary of Contents for 009028
Page 3: ...1 1 2 3 4 5 ...
Page 4: ...4 2 3 1 2 1 3 ...
