EN
47
Emptying anti-freeze before use
1�
Empty the washer of anti-freeze� (Follow steps 1 and 2 under ”Emptying of water”�)
2�
Completely fill the container with clean, fresh water and run it through the system before
the washer is used, to ensure that all anti-freeze is flushed out�
TRoUBLESHooTING
The water pump does not work�
Check that the power cable has been
connected correctly�
Check the car battery and the cigarette lighter
socket�
Check the fuse for the cigarette lighter socket�
No water appears when the water pump
is started�
Check that the spray nozzle is not clogged�
Check that the water inlet is not clogged�
Check that the water hose is not bent�