Diagrams: DR-
SG130, DR-SG131
page 4 / 5
DHW restart hysteresis
Differential (5024) 5 °C
•
Switch the DHW mode to permanent
comfort (as per parameter 1620)
OR
•
Switch the DHW regime to permanent
reduced
If you want to lower the DHW setpoint (reduced setpoint) for a specific time range, use the
following settings
Line No. Value
• Heating gas
menu DHW
DHW release request
Release (1620) Timer programme
4/DHW
• Timer program
menu 4/dhw DHW
Choose the programming range
Preselection (560) e.g.: Monday-Sunday
Set the start of the comfort setpoint range
1st phase ON (561)
e.g.: 06:00 h
Set the end of the comfort setpoint range
1st phase Off (562)
e.g.: 22:00 h
•
Switch the DHW mode to permanent
comfort (as per parameter 1620)
Refer to the “§Electrical validation” chapter for the regulator input/output tests
Page 68 / 104
00U07337760-A
DORCHESTER DR-SG -
Installation, Operation and Maintenance