![background image](http://html1.mh-extra.com/html/hamworthy/tyneham-ahp60-14-18/tyneham-ahp60-14-18_installation-commissioning-and-servicing-instructions_3478045049.webp)
Edition: 10 / 2022
Page 49 / 86
Tyneham Heat Pump Control - Installation, Use and Maintenance
8.10. "Status" parameters
The current operating state of the installation is viewed using the status displays.
Line no.
Programming
8003
DHW status
Final user (info level)
Commissioning, specialist
Status No.
Active manual intervention.
Active manual intervention.
4
Fluid decanting regime
Fluid decanting regime
199
Heat maintenance mode active
222
Heat maintenance mode EN
Heat maintenance mode EN
221
Discharge protection active
79
Load duration limit active
80
Load locked
81
Load locking active.
82
Forcing, maximum temperature of the tank
83
Forcing, maximum temperature of load
84
Forcing, anti-Legionella setpoint
85
Forcing, comfort setpoint
86
Forced load active
67
Active start
92
Accelerated load active
94
Load, Comfort setpoint
96
Load, reduced setpoint
97
Activated load
69
Antifreeze protection enabled
Antifreeze protection enabled
24
Antifreeze protection of water heater snapshot
223
Delayed power-cut response active.
Delayed power-cut response active.
17
Load on standby
Load on standby
201
Under load, maximum temperature of the tank
70
Under load, maximum temperature of load
71
Under load, comfort temperature
99
Under load, reduced temperature
100
Under load
75
Stop
Stop
25
Ready
Ready
200