I/O Ports Cover
1
Save all your data before clicking on shut down. Disconnect the power supply from the system.
To avoid injury, care must be taken when removing the HDD tray.
■ Storage(HDD/SSD) Replacement
① Detach the I/O Ports Cover.
② Rotate the hand screw counterclockwise
③ Pull the HDD tray out from the system.
④ Separate the HDD from the bracket.
⑤ Replace with new HDD into bracket.
and assemble in reverse order.
2
2
3
4
4
a
① Lift the Lever (ⓐ).
② Pull the stand in the direction
of the arrow indicated.
③ Lift up and remove the stand.
The stand is heavy so please be careful.
For your safety, you must put the lever in the correct insertion point when reassembling.
■ Stand Separation
Lever
Insertion Point
1
2
3
I/O Ports Cover
When reassembling the card reader, you must assemble tightly otherwise the card will not be recognized by the reader.
① Detach the I/O Ports Cover by pushing it upwards.
② Disconnect MSR connector.
③ Remove both screws.
④ Separate the MSR by pushing it in the direction of the arrow.
■ Card Reader (MSR, SCR, iButton) Separation
1
2
3
4
HM1M
-00007C
