4
Optional Extras
volume testing.
Abrasion Tester Head
(HAN-B1002RT4HEAD-S)
A more aggressive test, useful for assessing through cure of UV coatings or high abrasion transit testing.
Solvent Resistance Test Head
(HAN-B1002RT4HEAD-W)
Used to test the water, detergent, solvent or fat resistance of inks and coatings.
Operation
Assembly
•
Remove the instrument from all packaging. Retain the packaging so that the equipment can be returned for calibration
and service repairs.
•
Place the instrument on a suitable bench and put the supplied
bull’s
eye spirit level on the instrument bed next to the
rotating sample holder.
•
Check the instrument is level, the bubble should be contained within the circle in the centre of the spirit level. If the
weight platform is not level, use the supplied spanner to adjust the feet of the instrument.
Powering the instrument
•
Use the supplied mains lead to connect the instrument to a suitable mains supply.
•
Switch the instrument on using the button at the rear of the instrument.
Universal Sample Cutter
(RL-A80-005)
Allows for simultaneous cutting of 50mm and 115mm ø samples
Suitable for film and paper-
based samples with a thickness between 6 and 250 microns (μm)
Fig 1
–
Welcome screen
Summary of Contents for RL-A80-005
Page 14: ...14 Certificate of Conformity...
