Dolphin® 7900 Series User’s Guide
Rev D
7 - 7
System Tab
The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to
Start
>
Settings
>
System
tab. Tap the appropriate icon to open that system setting.
About
The About system setting displays specific information about what is loaded on the terminal. It contains three tabs:
Version
tab
Displays the information about the software, operating system, and processor of the terminal.
Device
ID
tab
Displays the information the terminal uses to identify itself to other devices. It can be important to
know this information if the Dolphin terminal is going to be part of a networked system of devices.
Device name:
Displays the system’s default name. This is the name used by ActiveSync.
Description:
Displays the description of the device ID.
Copyrights
tab
Displays important copyright information.
Backlight
The Backlight system setting enables you to customize backlight functionality for the display. For more information, see
Adjusting
the Backlight
on page
4-3.
Certificates
This system setting is designed to manage certificates for 802.11b networks. However, on Dolphin terminals, you manage
certificates through Meetinghouse; see
Installing Certificates with CertAdd
on page
9-29.
.
ClearType Tuner
This system setting enables you to adjust the level ClearType font rendering by moving a slider. The sample text displays the
setting results immediately. Of course, you must first enable ClearType font rendering to change the appearance of fonts on the
screen; see
ClearType Tab
on page
7-13.
.
Clock & Alarms
This setting sets the system clock. Appointments, scheduled events, and any function on a schedule runs off this setting. You
need to set the time zone and time after each hard reset; see
Setting the Time and Date
on page
-7.
Downloaded from
www.Manualslib.com
manuals search engine
