manualshive.com logo in svg

Hand Held Products Dolphin 9500, User Manual

The Honeywell Dolphin 9500 is a powerful mobile computer designed for efficiency and durability. With its advanced features and rugged design, this device is perfect for demanding industries. Access detailed specifications and download the user manual for free at 88.208.23.73:8080, the go-to resource for all your manual needs.

Share
Download
background image

Dolphin® 9500 Series Mobile Computer User’s Guide

7 - 13

802.11b Wireless Security Supplement

AEGIS Client

®

 offers the most comprehensive IEEE 802.1X supplicant for securing wired and wireless networks. The Client is a 

standards-based implementation of IEEE 802.1X and can be configured to work with almost any network equipment - wired or 
wireless - that supports the 802.1X authentication standard. The Client is interoperable with 802.1X-capable wireless access 
points and authentication servers including Microsoft's IAS and Cisco's ACS.

The Client solves the problem of key distribution in wireless LANs by using public key authentication and encryption between 
Wireless Access Points (WAP) and roaming stations to exchange dynamic Wired Equivalent Privacy (WEP) keys. In addition, 
network managers can control 802.1X user profiles from a centralized RADIUS server or, in the case of TTLS, from a RADIUS 
Diameter or other AAA servers. The Client supports both wireless (802.11a/b/g) and Ethernet interfaces. 

System Requirements

You need the following equipment and software to run AEGIS Client software:

•           A computer with a network interface card and/or wireless network interface card installed that support the NDIS 5.1 standard 

for 802.11 WLAN object identifiers (OID). The AEGIS Client software installation routine expects to find your computer’s 
wireless card properly installed, even if it isn’t connected to a network. If the card isn’t in the computer, the installation program 
can’t make the proper program and protocol associations. Be sure your wireless card is installed!

•           The appropriate version of the AEGIS Client software package for your operating system. Contact HHP for the correct version 

for your company.

Platforms Supported

There are several versions of AEGIS Client software for computers using a wide variety of operating systems. Specific 
capabilities of a particular version of AEGIS Client may vary according to the operating system. This is due to varying levels of 
support for different EAP types by manufacturers. Drivers for some types of network hardware and operating system 
combinations don’t support as many EAP types as others combinations.

The following platforms are supported:

•           Windows Mobile Software 2003 [OS version "Pocket PC Version 4.20.1081 (Build 13100)"]
•           Pocket PC 2002 [OS version "Pocket PC Version 3.0.11171 (Build 11178)"]
•           CE.NET 4.1 [OS version "CE .NET Version 4.10 (Build 908)"]
•           CE.NET 4.2 [OS version "CE .NET Version 4.20 (Build 1088)"]

 

Note: Verify the operating system version by tapping Start > Settings > System tab > About. 

802.1X Supplicant Protocol Support 

Support for the Extensible Authentication Protocol (EAP) - RFC 2284

Supported authentication methods are as follows: 

•             CHAP/MD5 - RFC 1994 
•             EAP TLS Authentication Protocol - RFC 2716 
•             EAP Tunneled TLS (TTLS) - Internet Draft February 2002 
•             Cisco LEAP and PEAP
•             Microsoft PEAP 

 

Tested against the following servers:

•             Funk Odyssey 3.2 using TLS, LEAP and TTLS 
•             AEGIS Client 1.1.4 using MD5, TLS, TTLS, LEAP and PEAP 
•             Cisco ACS 3.2 using MD5, TLS, LEAP and PEAP

 

If you are using one of these authentication methodologies, you need to configure your 802.11b connection here, NOT 
through 802.11b Settings. However, if you want to set the AP Search Threshold above the default setting of Low Density, 
you do need to change that setting in 802.11b Settings; for details, see 

Network Profile Tab

 on page 

7-7.

!

Summary of Contents for Dolphin 9500



























































































































































































































































































































Reviews:

No comments

Related manuals for Dolphin 9500

AML M8050 User Manual preview
M8050
Brand: AML Pages: 55
e-survey UT12P Quick Start Manual preview
UT12P
Brand: e-survey Pages: 26
Hoft & Wessel HW 90396 Instruction Manual preview
HW 90396
Brand: Hoft & Wessel Pages: 97
Unitech PA550 Quick Reference Manual preview
PA550
Brand: Unitech Pages: 10
ashtech MobileMapper 100 Getting Started Manual preview
MobileMapper 100
Brand: ashtech Pages: 78

Brands by name

Popular brands

Load more brands