manualshive.com logo in svg

Hand Held Products Dolphin 9500, User Manual

The Honeywell Dolphin 9500 is a powerful mobile computer designed for efficiency and durability. With its advanced features and rugged design, this device is perfect for demanding industries. Access detailed specifications and download the user manual for free at 88.208.23.73:8080, the go-to resource for all your manual needs.

Share
Download
background image

3 - 10

Dolphin® 9500 Series Mobile Computer User’s Guide

Batteries

Dolphin 9500 Series features intelligent battery technology. There are two types of battery power: the main battery pack installed 
in the back panel and the backup battery located inside the terminal. They are designed to work together to prevent data loss 
when the terminal is in use over long periods. Both batteries must be completely charged before using a Dolphin terminal for the 
first time. 

Main Battery Pack

Use only the Li-ion battery packs provided by HHP. The use of any battery pack not sold/manufactured by HHP in the 
Dolphin 9500/9550 terminal will void your warranty and may result in damage to the Dolphin terminal or battery.

 

The 7.4V, 14.8 watt hour Li-Ion battery pack is the primary power source for the Dolphin. The Li-Ion battery is designed to operate 
in a temperature range of -10 to 50

°

C (14 to 122

°

F). For the location of the Li-Ion battery on the terminal, see 

Battery/Battery 

Well

 on page 

3-5.

 

Charging Options

When the Li-ion battery is installed in the terminal:

•           Place the terminal in a HomeBase (page 12-7) or Mobile Base (page 13-4) that is connected to an appropriate power supply.
•           Connect a charging/communication cable to the mechanical connector, plug the cable into the AC adapter, and plug the 

adapter cable into a power outlet.

•           Connect the terminal to the Mobile Charger and vehicle power port.

When the Li-ion battery is not installed in the terminal:

•           Place the battery pack in the Dolphin QuadCharger - see 

Charging Batteries in the QuadCharger

 on page 

15-3.

•           Place the battery pack in the auxiliary battery well of the HomeBase - see page 

12-7

. 

Charging Time

The Li-ion battery pack requires four hours to charge completely.

Internal Backup Battery

Located inside the terminal, the backup battery is a 3.6 Volt nickel metal hydride (NiMH) battery. 

Purpose

The internal backup battery prevents the terminal from being reset if you need to remove and replace the main battery pack. It 
retains RAM data and allows the real-time clock to remain operational for up to 30 minutes when the main battery pack is 
removed. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup battery needs to be 
recharged to function according to its specifications. 

Note: Data and programs stored in Flash memory are not lost even if the internal backup battery fails. However, you must reset 

the real-time clock; see 

Setting the Time and Date

 on page 

2-10.

Charging

The internal backup battery is powered by the main battery pack. Therefore, charging the internal backup battery requires that 
the main battery pack be installed in the terminal and the terminal be connected to a charging device.

The internal backup battery must be fully charged before using the terminal for the first time. The initial charge cycle takes 
approximately eight hours. After that, if the internal backup battery becomes fully discharged of power, it requires a minimum of 
10 hours of charging time to function normally.

Guidelines for Use

Follow these guidelines to maximize the life of the Dolphin’s internal backup battery:

•           Keep a charged Li-Ion battery pack in the Dolphin terminal. The internal battery prematurely discharges if there is not at least 

a partially charged battery in the terminal.

•           Keep the Dolphin terminal connected to power when the terminal is not in use. 

!

Summary of Contents for Dolphin 9500



























































































































































































































































































































Reviews:

No comments

Related manuals for Dolphin 9500

CCV 02733-87 First Steps preview
02733-87
Brand: CCV Pages: 32
Sony PEG-TG50 - Personal Entertainment Organizer Specifications preview
PEG-TG50 - Personal Entertainment Organizer
Brand: Sony Pages: 1
Sony PEG-SJ33 CLIE Handbook (primary manual) Specifications preview
PEG-SJ33 CLIE Handbook (primary manual)
Brand: Sony Pages: 1
Sony PEG-SJ30 - Clie Color Handheld Brochure preview
PEG-SJ30 - Clie Color Handheld
Brand: Sony Pages: 1
Sony PEG-TJ37 - Personal Entertainment Organizer User Manual preview
PEG-TJ37 - Personal Entertainment Organizer
Brand: Sony Pages: 24
Sony PEG-T415 - Personal Entertainment Organizer Operating Instructions Manual preview
PEG-T415 - Personal Entertainment Organizer
Brand: Sony Pages: 30
Sony PEG-SJ33 CLIE Handbook (primary manual) Operating Instructions Manual preview
PEG-SJ33 CLIE Handbook (primary manual)
Brand: Sony Pages: 80
Intermec CN3NI Quick Start Manual preview
CN3NI
Brand: Intermec Pages: 2
Seuic AUTOID Series User Manual preview
AUTOID Series
Brand: Seuic Pages: 19
Seuic AUTOID CRUISE1 Reference Manual preview
AUTOID CRUISE1
Brand: Seuic Pages: 64
Seuic AutoID 9 Manual preview
AutoID 9
Brand: Seuic Pages: 104
Assistech GoTalk9+ User Manual preview
GoTalk9+
Brand: Assistech Pages: 4
Palm PalmOne Zire 71 Handbook preview
PalmOne Zire 71
Brand: Palm Pages: 22
Palm Zire 21 Handbook preview
Zire 21
Brand: Palm Pages: 196
Garmin iQue 3600 - Palm OS 5.0 150 MHz Application Manual preview
iQue 3600 - Palm OS 5.0 150 MHz
Brand: Garmin Pages: 76
HT COMBIG2 User Manual preview
COMBIG2
Brand: HT Pages: 164
Motorola MC9500-K - Win Mobile 6.1 806 MHz Installation Manual preview
MC9500-K - Win Mobile 6.1 806 MHz
Brand: Motorola Pages: 2
Motorola MC70 - Enterprise Digital Assistant Brochure preview
MC70 - Enterprise Digital Assistant
Brand: Motorola Pages: 12

Brands by name

Popular brands

Load more brands