2
Cordless Scanning System Quick Start
This guide contains the following information:
•
Charge pack and charging Information
•
Associating the cordless scanner to a base
•
Customer support information
•
Limited warranty and warranty durations
About the Charge Pack
(CLESS/NIMH/S)
Power is supplied to the cordless scanner by a
rechargeable charge pack that snaps onto the
bottom of the scanner. Each scanner is shipped
with a charge pack.* (See the charge pack
specifications in the Cordless System Manual for
storage information.)
*Order backup or replacement charge pack(s) from
your distributor.
North American Charging Information
The charge pack is designed to plug into any two-
prong North American AC power outlet for direct
charging. You need no additional equipment, and you can recharge the pack
virtually anywhere.
Worldwide Charging Information
Since the charge pack is rated for both 120/240 V, 50/60Hz applications, it may
be charged worldwide. Inexpensive snap-on adapters and custom 2-bay and 6-
bay charge strips are available to accommodate a wide variety of electrical
outlets internationally.
Charge Pack Recommendations
•
Charge packs are shipped uncharged and need to be conditioned for full
capacity and longer life.
•
To maintain the maximum charge capacity, charge packs should be allowed
to fully discharge prior to charging. It is recommended that you establish a
process where a charge pack is used until it is fully discharged and fully
charged before its next use.
•
Avoid using the charge pack in extreme temperatures.
•
Do not disassemble the charge pack. There are no user-serviceable parts in
the charge pack.
•
Avoid extended overcharging; do not leave the charge pack charging for more
than two weeks.
•
Periodically, about every 6 months, repeat the charge pack conditioning.
Summary of Contents for SCANTEAM 2070
Page 4: ...ii ...
