Semmelweis Scanner – User Guide v22.03
17
4.3. Using the integrated stand
Integrated stand without the
Semmelweis Scanner.
Adjust
the
Semmelweis
Scanner height according to
your preferences by pushing
the black button. (The
picture is just an illustration
of the stand. The scanner is
fixed to the stand.)
Release the integrated stand.
Push the black button
(top back on the Scanner)
with one hand while lifting
up the Semmelweis Scanner
with the other hand.
The integrated stand can be adjusted to three different heights. While adjusting the height, the
base of the stand needs to touch the surface, you can adjust the height by pressing the button on
the stand and lifting the scanner.
4.4. Inserting the SIM card and connecting to the mobile network
If a SIM card has been provided by the manufacturer, then it is already in the Product. You can
skip this step. The SIM card should be listed on the ‘packing list’.
If you purchase the SIM card, please note that it must be a standard-sized one.
SIM parameters: data plan: 100 Mbyte/month is suitable for 400
measurements (e.g., 20/day)
Disconnect main plugs before any kind of intervention into the device.
On the right side of the device, there are the following
ports: 1. SIM card, 2. Ethernet, 3. USB. The USB and
Ethernet (LAN) ports are for service use only and are
not required for regular use.
