Semmelweis Scanner – User Guide v22.03
19
Hold your finger on the
On/Off button, until it turns
on (1-2 secs).
This is a
capacitive switch
requiring a close contact,
but no significant
pressure.
First, you will see the
HandInScan logo and the
current software version
number.
A welcome screen will
appear, asking you to log in
with your RFID card.
Please hold your RFID app. 1 cm above the LEDs at the bottom
right corner of the surface to log in.
In order to turn off the system, hold your finger on the power switch for at least 6 seconds.
4.7. Connecting to WiFi
The Semmelweis Scanner has built-in WiFi connection capabilities for:
•
Sending measurement data to the Reporting System
•
Remote support, software update
•
Diagnostics, monitoring (under a maintenance contract)
Network settings (such as WiFi SSID and password) are set up at the factory before shipping
based on information provided in the Purchase Order.
The default WiFi network is always set:
SSID:
handinscan
Preshared-key (password):
budapest
The default WiFi network can be created e.g. as a mobile hotspot if none of the other
connections are available. Setting up a mobile hotspot for your default WiFi network:
