Semmelweis Scanner – User Guide v22.03
8
2.2. Intended use
The Semmelweis Scanner is intended to be used by any staff member of an institution; in
various areas e.g., healthcare, biotechnology, food or hospitality industry, where the correct
performance of hand hygiene is inevitable to maintain high-quality standards.
The device may
only be used for training purposes and hand hygiene compliance monitoring.
Complete
compliance monitoring cannot be achieved with the Product. The Product may be used in a
domestic environment as well, under the same conditions.
The Semmelweis Scanner is designed to be used indoors, in a furniture-top (with appropriate
height) or wall-mounted position. Rolling stands can be ordered as an option to make relocation
of the scanners within the institution easier. The initial assembly is done by the producer or the
distributor’s qualified personnel. The device must be positioned in a way, which allows easy
access for the users (recommended at a height of 120-140 cm (4-4.5 feet) of the hand insertion
area, above the ground).
The alcoholic hand rub to be used with the Semmelweis Scanner is flammable, you must keep
the product and its accessories away from fire.
Keep the product and its accessories away from fire, extreme heat and direct
sunlight.
Use of the Product does not substitute the official hand hygiene quality requirements of your
organization.
2.3. Notes regarding operational safety
Do not touch the inside of
the device.
The surface of the LEDs and electronics may be
hot.
Wash hands after
measurement.
The used hand rub or gel is typically licensed for
training use only. Wash hands with soap and water
before returning to work.
Boot time: 1-2 minutes after
a complete restart.
Keep away from sunlight.
Do not expose the device to direct sunlight.
Clean device with soft tissue
and non-alcoholic detergent.
Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the Product.
Disconnect the main plug.
Disconnect main plugs before any kind of
intervention into the device.