Semmelweis Scanner – User Guide v22.03
9
Your device is a product of superior design and craftsmanship and should be treated with care.
Please follow the suggestions below.
•
It is forbidden to disassemble the slide cover of the device.
•
It is forbidden to touch the internal parts of the device.
•
The electric connection should be made to grounded outlets only.
•
Do not place any object on top of the Product. This may cause malfunction.
•
Keep the Product dry. Precipitation, humidity and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your Product does get wet, allow
it to dry completely.
•
Do not use or store the Product in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
•
Do not store the Product in hot areas. High temperatures can shorten the lifetime of
electronic devices, damage batteries and warp or melt certain plastics.
•
Do not store the Product in cold areas. When the Product returns to its normal
temperature, moisture condensed inside the Product may damage electronic circuit
boards.
•
Do not attempt to open the Product.
•
Do not drop, knock or shake the Product. Rough handling can break internal circuit
boards and fine mechanics.
•
Do not plug in the Product to a socket after removing the slide cover. Touching the LED
lights and the electronics may cause burn injuries.
•
Do not place the Product on a sloping or unstable cart, stand or table, as it may fall.
•
Do not paint the product. Paint can clog the moving parts and hinder proper operation.
•
It is forbidden to make any software or hardware modifications to the Product or its
official attachments.
•
Unauthorized modifications or attachments could damage the Product and may violate
regulations governing radio equipment.
These suggestions apply equally to your Products and its parts, or any accessories. If the Product
is not working properly, please contact your distributor or the manufacturer.
Do not try to
repair the Product.
