info@handandeyestudio.co.uk
handandeyestudio.co.uk
©2019
Lighting for all the senses.
Duo
Assembly Instructions EU/USA
1/1
1. Glass shade
2. Max 6W bulb (not supplied)
3. Lamp holder E27 (E26 USA)
4. Metal weight
5. Two core electric flex with woven fabric sheathing, switch and plug.
6. Ceramic base
7. Metal washer & screw
Diagram 1
Lamp components
Steps
A Assembly
The lamp holder (3) and weight (4) will already be
screwed into the bottom of the Duo light (6).
Step 1: Fit Lightbulb
Screw in your E27 (E26 USA) light bulb of Max 6W (2) into
the lamp holder (3).
Step 2: Add the glass shade
Carefully place the glass top (1) into the ceramic base.
B Securing Duo to a surface
For additional stability, we recomend that you
secure the Duo lamp to a surface.
Step 1:
Decide where you want the lamp to be placed, mark and
drill a hole into the surface using a 5mm drill.
Step 2:
Now carefully remove the glass top (1) and place to the
side. Unscrew the lamp holder (3) and weight (4) from
the bottom of the Duo lamp (6).
Step 3:
Push the screw (8) through the hole you have drilled into
the surface and through the hole the base of the duo
lamp. Depending on the surface you wish to secure the
lamp to you may need a longer screw than that which we
supply (4mm screw diameter, M4).
Now screw the weight(4) and lamp holder (3) back to the
bottom of the Duo lamp and it will be secured.
2
3
5
6
1
4
7
