background image

info@handandeyestudio.co.uk 
handandeyestudio.co.uk

©Oc

tober 202

1

Lighting for all the senses.

Melina Wall Light 

Instructions & Safety  

Information

70mm

2.7 inch

1

2

7

m

m

2

.7

 i

n

c

h

18

109

4.3 inch

165

6.5 inch

Dimensions- Side View

Dimensions- Top View

70mm

2.7 inch

1

2

7

m

m

2

.7

 i

n

c

h

18

109

4.3 inch

165

6.5 inch

Dimensions- Front View

70mm

2.7 inch

1

2

7

m

m

2

.7

 i

n

c

h

18

109

4.3 inch

165

6.5 inch

Design by 

Mentsen

Material & finish

 

- Raw brass wall fitting 
- Matt glass in either opal or clear-etched finish

Dimensions & weight 

Ø165mm, H.127mm, 0.85kg 
Ø 6.5inch, H. 5inch, 1.87lb

Lamp type & wattage 

•  G9 lamp holder, max 6W LED (bulb not included)
•  Dimmable                                                                                                                    

(if used with compatible dimming controls and bulbs)

IP rating 

IP20

Wiring certification 

CE, EN60598 

Summary of Contents for Melina

Page 1: ...mm 2 7 inch 18 109 4 3 inch 165 6 5 inch Dimensions Front View 70mm 2 7 inch 127mm 2 7 inch 18 109 4 3 inch 165 6 5 inch Design by Mentsen Material finish Raw brass wall fitting Matt glass in either opal or clear etched finish Dimensions weight Ø165mm H 127mm 0 85kg Ø 6 5inch H 5inch 1 87lb Lamp type wattage G9 lamp holder max 6W LED bulb not included Dimmable if used with compatible dimming contr...

Page 2: ...re that the light is securely mounted to the ceiling or wall and that there is a suitable substrate for this Ensure you are working from a safe platform or ladder if working at height Do NOT use a lightbulb of more than 6W Take care with the glass shade as this can break if it is hit hard enough If at any point your lightbulb breaks then as with any light do not touch the filament LED part unless ...

Page 3: ...d the wall 2 Connect to mains electrics Connect the pre installed electrical cables to the mains supply using the Wago connectors and ensuring the correct polarity see diagram 3 Connections and excess cables can be housed in the brass wall mount Note Always use a professional electrician Ensure the mains electrics are OFF prior to making the electrical connections If cables are cut on site remembe...

Page 4: ...drivers as these can leave marks on the glass The brass connector ring is pre attached to the glass shade 6 Fitting the glass to the wall mount The glass shade comes fitted with a brass collar which screws onto the brass wall mount Locate the shade onto the brass wall mount inserting the light bulb carefully through the open neck of the glass Gently turn the shade clockwise keeping the glass paral...

Reviews: