AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29
P.30 of 43
>
Advance Operation (cont.)
>> Quill Latch
This feature allows the upper roller to latch in the up position after tape is cut.
To enable this function, press the corresponding button until off becomes on..
If this function is not enabled, the upper roller will come down after the tape is fed.
>> Foot Hold
This feature is used to control the after cut sequence.
To enable this function, press the corresponding button until off becomes on. During this mode, the
after cut sequence will be finished even the left foot pedal is released after the cutting.
If this function is not enable, the after cut sequence is cancelled when left foot pedal is released.
Press to ON to enable quill latch
Press to ON to enable foot hold
