background image

3 - 12

Rev D

11/20/2007

 Dolphin® 7600 User’s Guide

Top Panel Features 

*Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine.

Access Door

For more memory, you can install optional memory cards by removing this door. For details, see 

Installing Memory 

Cards

 on page 

3-12.

When closed, the access door seals the memory interface from moisture and particle intrusion thus preserving the 
terminal’s environmental rating. 

Image Engine Window

The angled image engine reads and decodes most popular bar code symbologies and takes images like a digital 
camera. For more information, see 

Using the Image Engine

 on page 

5-1.

Installing Memory Cards

The Dolphin 7600 supports Secure Digital (SD) memory cards of the following capacities:

256  MB

512  MB 

1  GB 

2  GB 

To install an SD card, you must open the access door on the top panel (

Top Panel Features

, page 

3-12)

.

Note: Access door removal requires a Phillips head screwdriver.

1. Press Blue + Backlight key to put the terminal in suspend mode; see 

Suspend Mode

 on page 

3-20.

2. Place the terminal on a flat, secure surface with the keyboard face-up.

3. Unscrew both screws on the access door.

Image Engine Window

 

(with engine)

Access Door

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin...







































































































Reviews: