10
Replacement of hard disc
Replacement of SIM card
Tools needed: screwdriver Torx T8 and Torx T10.
1. Unscrew the screw (T8) and remove the upper left corner protector.
2. Unscrew the two screws (T8) and remove the left computer grip.
3. Unscrew the two screws (T10) and remove the lid.
4. Release the lever and remove the hard disc.
Assemble in reverse order.
Tools needed: screwdriver Torx T8 and Torx T10.
1. Remove the hard disc, see chapter “Replacement of hard disc”.
2. Slide the latch over the SIM card holder to the side.
3. Push down the SIM card and let it spring out from the slot.
Assemble in reverse order.
ALGIZ 8 Manual - Using the Algiz 8
Bridge battery
The Algiz 8 is equipped with a bridge battery, which is located inside the Algiz 8. The purpose of
the bridge battery is to supply power when the battery pack is replaced and provide power to some
components when the Algiz 8 is turned off.
The bridge battery is charged when the AC power source is connected. It is also
charged with power from the battery pack.
Note!
The bridge battery is designed for short-term use only.
