Quick Check® SV Series User’s Guide
6 - 13
~LI#
Include the specified symbology for a label
‘#’ identifies the included symbology:
~LL
Report the excluded symbologies and the included symbologies specified for all the
defined bar codes.
Hexadecimal value ‘4’ - identifies the beginning of the data packet response
The mode for each symbology is reported in a character string, which terminated
with either ‘IN’ (for included) or ‘EX’ (for excluded) followed by a ‘\r’ character
(carriage return) and a ‘\n’ character (a line feed). See the example below. The
next two columns indicate statuses of the ~LM and ~LN commands respectively.
(The ~LM command is not used in normal operation.)
Hexadecimal value ‘5’ - identifies the end of the data packet response
L - the last character of the sent command string
Example return using ScanView:
~LN##
Set Minimum Number of Bar Codes Per Label (i.e., per sync period)
1
UPC/EAN
2
Code 39
3
Code 128
4
Interleaved 2 of 5
5
Code 93
6
Codabar
1
UPC/EAN- IN
2
C39- IN
3
C128- IN
4
CITF- IN
5
C93- IN
6
CBAR- IN
min chars:
032
number bc:
099
L
Summary of Contents for SV series
