HQ Pro-Stitcher User Manual
07/23/12
5.16 Design Menu
Stretch Width/Height
With a defined
Area
, selecting either of the
Stretch
Width
or
Stretch Height
buttons causes the
repeated design to stretch to fill the area in either
width or height
(
Figure 5.53
)
.
Fit
Press the
Fit
button to have the HQ Pro-Stitcher
calculate the optimal number of repeats in both
height and width. It will not stretch to fit the area
unless the
Stretch
options are selected or
Skew
is
enabled
(
Figure 5.54
)
.
Point 2 Point
Some designs are intended to be linked together
horizontally but must be overlapped for the start
and end points to match up
(
Figure 5.55
)
. Using
the
Point 2 Point
button causes the designs to link
automatically. For this function to be successful, the
design start and end points should be at the same
height, or vertical coordinate. Press the
Point 2
Point
button to align the designs such that the end
point of the first design matches up with the start
point of the next design
(
Figure 5.56)
. The design
repeats will only adjust horizontally, not vertically.
Point 2 Point
should be turned off to manually
enter a
Distance
value in the horizontal direction.
Figure 5.53
Figure 5.54
Figure 5.55
Figure 5.56
