Belt Cover Removal
1.
Lo
osen
the two washer screws
a couple
turns
that
hold the belt cover to the casting
on the bottom hand wheel side of the machine.
2.
Carefully lift the machine back
upright. Lift up on the handle and
loosen
the small washer screw
a couple
turns
directly under the handle on the
right side.
3.
Remove the Phillips screw directly
under the hand wheel.
4.
Carefully start to pull on the back of
the belt cover to release the clips that
hold it to the rear cover. As you start to
release it from the top, work your way
down to release the other four clips.
7