Top Cover Installation
7
2
1.
Lift the handle up, insert the top cover unit
starting from the right side, and fit it into
position. Lower the handle, lift up on the top
cover lid, and push down on the front of the top
cover to lock the tabs into the front cover.
2.
Replace the two set screws that hold the
front cover to the machine. The smaller of the
two screws goes directly under the horizontal
spool pin.
3.
Lift up the handle and replace the small
Phillip's head screw on the left side of the
machine.
Important: Do the following so you
only have to put the top cover on
once!
Presser Bar knob on first before the
top cover, then cover with lid
closed and handle up!