General Specifications
Dimensions:
(210
X
410
mm)
8.25”
X
16.00”)
Sewing
Speed:
(Min
150spm,
Max,
1500
spm)
Needle
System: 134R
(135
X
7)
Needle Sizes, (recommended):
14/90 - 19/120
Hook
System:
(Rotary,
custom
made,
Cerliani,
Type FA, Vertical, M Bobbin)
Bobbin
Type:
Aluminum,
Class
M
Bobbin
Case:
Cerliani,
Type
MF
Motor
Type:
Brushless
DC,
internal
encoding
Needle Positioning:
Up and down, full and half stitch
Electrical
Power:
120
V,
60Hz,
150
W
LED
Power
Consumption:
20
W
Sew
Foot
Stroke/Lift:
5
mm
Needle
Bar
Stroke:
35.3
mm
Take-Up
Stroke:
73
mm
Lubrication, (main components):
(Kluber Lube, permanent)
Lubrication
of
hook:
(Velocite
10,
Texaco
22)
Assembly Torque Specifications
The Torque Specifications apply to all internal fasteners in sizes 4.0, 5.0, and 6.0mm in
general at ISO 4762 Screw class 8.8. The torque specifications are also generally
classified as soft jointed and are listed according to size and placement in the machine.
1.
4 mm Allen Socket Head Cap Screws, Class 8.8 @2.5Nm
•
Head-frame, and main bearing retainers
2.
5mm Allen Socket Head Cap Screw Class 8.8@ 5.6Nm
•
Transmission Housing,
•
Motor Frame Mounting,
•
Pulleys,
•
Collars
3.
6mm Allen Socket Head Cap Screws Class. 8.8 @ 9.9Nm.
•
An exception must be observed here since the screws are considered soft
jointed and shallow threaded and are used externally. It is therefore
advised that this torque specification not exceed 6Nm.
I