HQ Infinity User Manual
| 15
2. Connect the RJ45, or network style, phone
cords into the handlebars. Ensure that the cable
exiting the right side of the machine head plugs
into the left handlebar lighting connector and
the cable exiting the left side of the machine
head plugs into the right side of the handle bar.
3. Place the 5mm washer on the M5 hex screws
and place into the top two holes in the
handlebar bracket.
4. Align the bracket and hex screws with the pre-drilled holes behind the machine’s head and fully
tighten the top two screws with the 4mm hex wrench.
NOTE
: You may find it is easier to remove the front poles from the Gallery frame so you can
position yourself behind the machine’s head.
5. Place the 6mm washer on the M6 hex screw
and insert it into the bottom hole and partially
tighten. Alternately, you can use the extra
handlebar lever.