22 |
www.HandiQuilter.com
1. Partially loosen the side knob on the grip of the
video camera and slide the grip around the ball
end of the mounting screw on the bracket.
2. Turn the knob clockwise to tighten the grip end
of the camera.
3. Position the camera so it shows the bottom of
the quilt while quilting.
4. Plug the cable into the port on the left side of
the base end cap.
5. Tuck the excess cable into the accessory track
on the left side of the machine base and use a
T-slot clip to hold the cable in place.
For more information about the using the video camera and viewing the video images on the display, see
Using the Video Camera
in the
Toolbar Options s
ection of this manual.
