HQ Infinity User Manual
| 49
To control the lights on the machine
• To open the Lights screen, touch the
Lights
icon in the toolbar. After selecting the icon, it turns
green and Lights screen opens.
When lights are on, the on/off button displays in color.
Touch the on/off button to quickly turn off the light.
Touch the All Lights (1,2,3) button to turn on all of the lights
at once. If they are already on, touch the button to turn off
all lights at once.
Otherwise, use the slider to vary the intensity of the light.
Touch the black dot and drag to the right to increase
the intensity or to the left to decrease the intensity. The
intensity settings are saved when lights are turned off and
will be the same when you turn them on again.
To use UV lighting
UV lighting can be very useful when viewing white thread or white chalk on white fabric. The best contrast
is achieved when viewed in a dark or dimly lit room. Although Handi Quilter has chosen to use UV lights
which emit a light wavelength at the lowest end of the UV spectrum to minimize eye strain and damage,
constant or direct exposure to any UV lighting can cause eye strain and may lead to permanent eye
damage. Be careful and avoid looking directly at the UV lights (which emit a violet colored light). The UV
lights should only be used when other lighting sources cannot produce the visual contrast necessary to
achieve accurate quilting.
Touch the UV
light button to
turn it on or off.
When you turn
the UV lights on,
all other lights
are turned off.
Light 1 is under
the arm of the
machine. Light 2 is
the light ring that
illuminates the
needle and stitching
area. Light 3 is on
the handlebars and
adds light to the
stitching area.
The Lights
button is selected
(green).
