HQ Infinity User Manual
| 53
• After downloading the updated software
to a USB drive, insert the drive in the
designated USB port in the machine. Look
for the message in the bottom bar that
confirms a USB drive has been inserted. If it
doesn’t appear, reinsert the USB drive. Then
touch the
Update
button.
To update the machine’s software
ONLINE
: For more information about updating the machine’s software, watch the video
Updating
the Software on the Infinity
at:
http://www.handiquilter.com/videos/hq-infinity/243/
.
Â
IMPORTANT
: If you are running the Infinity from a Pro-Stitcher tablet computer, the Update screen
has only the machine icon because you update the machine software only. The Infinity software is
part of the Pro-Stitcher software. Make sure you are also using the latest version of Pro-Stitcher.
However, you’ll update the rear display using the instructions below.
1. Insert the USB drive into the first USB port on the front-left
side of the machine. Then touch the machine icon to update
the machine’s software.
2. You will be prompted to choose the file you want to use
to update the machine software. Touch the
Select Version
box and then select the filename of the update file
you downloaded.
