60 |
www.HandiQuilter.com
NOTE
: If you turn on or off the low-bobbin alarm on this screen, it is also turned on or off on the
Alarms screen.
The next time you use one of the threads for which you’ve set up a low-bobbin threshold, touch the bobbin
name box and choose the specified thread name by touching it. Insert a full bobbin with that thread into
the machine and press the Reset Bobbin button on the Main screen.
To delete a low-bobbin configuration
• Touch the bobbin name box and choose the specified thread name by touching it. Then touch the
Delete Bobbin
button.
To edit a low-bobbin configuration
• Touch the bobbin name box and choose the specified thread name by touching it. Then touch the
Edit Bobbin
button. Make any changes using the pop-up keyboard.
Handlebar button options
Your Infinity came with labels for the handlebars because you can decide which functions you want on the
right and left handlebars. For example, use the left handlebar for starting and stopping your quilting and
the right handlebar for moving the needle up and down to pull up the bobbin thread, or vice versa. For
more information about the handlebar labels, see To attach labels to the handlebars in the Installation and
Setup section of this manual.
After you have placed the labels on the handlebars, use the handlebar customization settings to confirm
your handlebar button choices and to make other customizations as to what the star and diamond buttons
on the handlebars will do.
Â
IMPORTANT
: However you configure the front handlebars, the rear handlebars are automatically
configured the same way.
To customize the handlebar buttons
• Touch the
Settings
icon in the toolbar. Then touch the
Configure Handlebars
button. Return to the
Main menu at any time by touching the
Home
button.
To switch the left and right handlebar buttons