8 |
www.HandiQuilter.com
2. Use only neutral soaps or detergents to clean the machine. Benzene, solvents and scouring powders
can damage the case and the machine and therefore should never be used.
3. Do not drop or bump the machine.
4. Always consult the manual to replace or fix the hopping foot, needle or any other part of the
machine. If necessary contact an authorized Handi Quilter representative or Handi Quilter technical
support.
Optional U.S. Grounding
for Customers with 120 VAC Connections
GROUNDED OUTLET BOXES
METAL
SCREW
ADAPTER
(B)
(C)
TAB FOR
GROUNDING
SCREW
(A)
GROUNDING PIN
This product is for use on a nominal 120 V or nominal 220 V circuit, and has a grounding plug that looks
like the plug illustrated in sketch A above. A temporary adapter, which looks like the adapter illustrated in
sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly
grounded outlet is not available. The temporary adapter should be used only until a properly grounded
outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending
from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by the metal screw.
Â
IMPORTANT
: In Canada, the use of a temporary adapter is not permitted by the
Canadian Electric Code.
To repair or adjust the machine
If the machine breaks down or needs adjustment, first check the troubleshooting chart in the appendix to
inspect and adjust the machine yourself.
For more product information and updates, visit our website at www.HandiQuilter.com.
The contents of this manual and product specifications are subject to change without prior notice.
Check for updated manuals at
www.handiquilter.com/manuals/
.
