2 2 |
www.HandiQuilter.com
1 . Partially loosen the side knob on the grip of the
video camera and slide the grip around the ball
end of the mounting screw on the bracket.
2 . Turn the knob clockwise to tighten the grip end
o f t h e c am
e r a.
3. Position the camera so it shows the bottom of
the quilt while quilting.
4 . Plug the cable into the port on the left side of
the base end cap.
5 . Tuck the excess cable into the accessory track
on the left side of the machine base and use a
T-slot clip to hold the cable in place.
For more information about the using the video camera and viewing the video images on the display, see
Using the Video Camera i n t h e Toolbar Options section of this manual.
