Figure 27
Figure 28
Figure 29
12
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
Power pack and footplate
Loading the power pack
and fitting the footplate
Items required:
Tools required:
• Power pack
• Loading toggle
• Footplate
• Shorting links
accessories kit
• Loading bars
• 13mm socket
• No. 2 Pozi-drive
• Pliers
• T30 Torx driver
1
Fit the power pack loading bars to the top
of the track
(Figure 27)
.
2
Feed the power pack on to the loading bars
(Figure 28)
.
3
Remove trunnion loading strip
(Figure 29)
.
4
Take off the front cover from the power unit.
5
Assemble the footplate (footplate accessories
kit)
Manual (gas strut) footplate
a
Remove the footrest assembly from the
footrest kit box. Loosen the screw and
remove the shaft from this assembly.
b
Attach the footrest to the power pack
(Figure 30)
– make sure that the gas
strut bracket remains in position. Tighten
the screw to hold the shaft in place
(Figure 31)
.
c
Loosen the top nut from the gas strut
bracket
(Figure 32)
.
d
Attach the upper part of the gas strut
to the bracket
(Figure 33)
.
e
Moving the footplate to the up position,
push the bracket downwards
(Figure 34)
.
f
Once the footplate is in the correct position,
retighten the gas strut bracket
(Figure 35)
.
