ENGLISH
Figure 59
Figure 60
Figure 61
Figure 62
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
21
Electrical connections 2000 Simplicity seat (manual)
Electrical connections
2000 Simplicity seat
(manual)
Items required:
Tools required:
• None
• None
1
Make seat and footplate electrical connections:
a
Connect the power switch (2 x red).
b
Connect the diagnostic display (red, black
and yellow).
c
Connect the key switch loom from the power
pack (orange and green) to the swivel switch
loom connector (2 x white).
(Figure 59)
.
d
Connect the seat to the swivel switch loom
connector (white)
(Figure 60)
.
e
Connect the toggle loom (orange, blue and
green)
(Figure 61)
.
f
Connect the infra-red receivers on the left
and right sides of the pack (blue sleeved).
Powered footplate only
g
Connect the powered footplate looms
(twin yellow)
(Figure 62)
.
h
Connect the motor cables (red and black)
as per diagram on
page 52
.
