Figure 120
Figure 121
40
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
Testing
f
Press the downside top trunnion safety
edge – the lift should stop. Drive the lift
in the down direction.
g
Drive the lift in the down direction.
h
Press the downside bottom trunnion safety
edge – the lift should stop.
6
Check the safety edges on the footplate
(Figure 120)
:
a
Drive the lift in the up direction.
b
Press the upstairs edge of the footplate
– the lift should stop.
c
Drive the lift in the down direction.
d
Press the downstairs edge of the footplate
– the lift should stop.
e
Drive the unit in the down direction.
f
Press the underside of the footplate
– the lift should stop.
7
Check the swivel interlock
(Figure 121)
a
Drive the lift in the up direction.
b
Swivel the seat – the lift should stop.
c
Drive the lift in the down direction.
d
Swivel the seat – the lift should stop.
8
Check the stopping distance of the lift:
a
Using the handset, drive the lift in the down
direction.
b
After the lift has travelled for about 2
seconds, release the down button.
c
Check that the lift stopped within 20mm of
the point where the button was released.
Power footplate only
1
For seat operated versions:
a
Lift the front seat squab.
b
The footplate should lift.
c
Lower the front seat squab.
d
The footplate should lower.
Manual swivel only
1
Check the swivel interlock:
a
Drive the lift in the up direction.
b
Swivel the seat – the lift should stop.
c
Drive the lift in the down direction.
d
Swivel the seat – the lift should stop.
