Fortress 1700 DT/TA
10
Approvals
The product meets the following requirements:
•
EN12184; 1999 Electrically powered wheelchairs and scooters, class B.
•
ISO7176-8 Requirements for static, impact and fatigue strengths.
•
ISO7176-9 Climatic tests for electric wheelchairs and scooters.
•
ISO7176-14 Requirements and test methods for power and control systems
for electric wheelchairs.
•
ISO7176-16 Requirements for resistance to ignition of upholstered parts.
The product has been EMC-approved (for electromagnetic compatibility) in
accordance with EN12184.
CE declaration
The product complies with the regulations of the Medical Devices Directive
and therefore bears the CE mark.
Use for intended purposes
(1)
The Fortress 1700 DT and TA scooters were developed for:
•
The transportation of people weighing up to 350 lbs (DT), 300 lbs (TA)
•
Use on pavements, groomed footpaths and cycle paths
•
Use in and around the house
The dealer must give you clear instructions before you start operating the
product independently.
Your first test drives of the Fortress 1700 DT or TA are best carried out under
the supervision of an experienced dealer.
The Fortress 1700 DT and TA scooters are not classified as road vehicles and
therefore may not be used on the road (crossing over the road being the only
exception).
The Fortress 1700 DT and TA scooters have a maximum speed of 10 km/h
(6 mph).
ENSURE THAT YOU ARE FULLY ACQUAINTED WITH THE CONTENTS OF THIS
MANUAL BEFORE STARTING TO DRIVE THE FORTRESS 1700 DT or TA.
If you use the scooter in a dangerous fashion, or use the scooter for purposes
other than those for which it is intended, Handicare will accept no liability for any
personal injury or damage to property caused by such misuse.
(
1) Intended use, as specified by EN 292-1, means the use for which the technical product is
suitable according to the manufacturer’s declaration, including the manufacturer’s instructions in
the sales brochure. In the event of doubt, use is taken to mean the use as construed from the
design, construction and function of a product. The instructions contained in the user manual must
also be followed within the scope of intended use.
