Fortress 1700 DT/TA
40
If the Fortress 1700 DT/TA is in the free wheel position:
•
It is not possible to drive the scooter.
•
The electronics can be switched on, but the motor cannot drive the scooter.
In this situation, the electronics should be switched off.
To be able to drive the Fortress 1700 DT/TA again, the following steps should
be carried out:
•
Switch the free wheel lever into the Brake Engage position.
•
Switch the scooter on by inserting the jack key into the jack key receptacle.
Now, you are able to drive the Fortress 1700 DT/TA again.
5.6 Disassembling the scooter for storage and/or transport
To be able to store the Fortress 1700 DT/TA in a small space or transport it in
a smaller vehicle suitable for this purpose, the scooter can be disassembled.
This way, it will take up less space. The steps to disassembling your Fortress
1700 DT/TA are as follows.
5.6.1
Removing the seat
(Seat may differ slightly from illustration)
The seat should be removed as follows:
•
Unlock the rotation mechanism of the seat by
pushing the seat lock lever toward the front of
the scooter.
•
Lift the seat straight up from the seat post.
•
Folding the backrest completely forward
reduces the size of the seat and can make
it easier to lift from its post.
5.6.2
Separating the scooter
The Fortress 1700 DT/TA scooter has been designed to be disassembled and
reassembled quickly, easily and without the use of tools. Should you have any
difficulty during either the assembly or disassembly, please re-check the
instructions and try again.
NOTE:
Ensure the power is off before you disassemble or reassemble your
scooter.
A