Labelling
69-88 cm
Gemino 30
Gemino 30M
Gemino 30S
Technical specifications
Materials used
The rollator and most of the parts
are manufactured using a special
aluminium alloy.
Areas of application
The rollator is intended for both indoor
and outdoor use on a flat and firm
surface.
It has been developed for individuals
with reduced muscle strength,
reduced movement, reduced mobility
and reduced stability.
Waste handling
Waste relating to packaging, parts
of the rollator or the rollator itself
can be treated as general waste.
The main component of the rollator
is aluminium, which can be melted
down for reuse. The plastic and
cardboard used in the packaging can
be recycled.
CE labelling
The product fulfils the requirements
of the EU-Directive 93/42 EEC for
medical devices. Based on the
classification rules in Attachment IX of
this directive the product is classified
into class I. The declaration of
conformity has been done under the
own responsibility of Handicare based
on the Attachment VII of this directive.
Procedure for reuse
Checklist before reuse
The rollator is intended/fit for reuse.
Check that the brakes function correctly
Adjust the brakes if necessary
Check that the brake levers are in the correct position
Clean the brake blocks
Clean the brake springs
Check that the wheels are in good condition and that they have not been
damaged
Replace any damaged or worn wheels
Check that all moving parts are working
Check and if necessary adjust all screwed connections
Check the wheel suspension and change if necessary
Ensure the rollator is clean and hygienic
21
MB4100
