Adjustments options
Version 2015v1
17
2.4.3
Adjusting the knee angle
•
See fig. 010505030.
The knee angle can be adjusted. This way, the most
comfortable knee angle can be chosen.
The angle of the central leg-support should be adjusted as
follows:
•
Loosen the clamp (A) by hand.
•
Now, the support (B) can be put into the most
comfortable position by hand.
•
Once the desired angle has been found, the clamp
should be tightened securely, so that the set angle
cannot slip.
SADKIB-010505030.nl.doc
2.5
Adjusting the legrests
See fig. 010504000.
Adjustment possibilities of the legrests:
A. Length.
B. Width.
C. Depth.
Legrests also have an optional angle adjustment.
XXXXXXX-010504000.en.doc
2.5.1
Adjusting the length of the lower-legrests
See fig. 010504010.
The adjustment of the length (L) of the legrests should be
done as follows:
•
Loosen the set bolt (A) a few turns with an Allen key with a
key width of 4 mm.
•
Adjust the length of the legrest.
•
Tighten the set bolt again.
Make sure that there is sufficient free space
under both footplates to be able to drive the
wheelchair over obstacles, without impacting
the footplates.
XXXXXX-010504010.en.doc
A
B
C
B
A
A
L
