Adjustments options
22
Version 2015v1
2.9
Adjusting the headrest (option)
•
See fig. 010510000.
A headrest can be attached to the back of the backrest.
The headrest can be adjusted in:
A. Height.
B. Depth.
C. Angle.
XXXXXX-010510000.en.doc
2.9.1
Adjusting the height of the headrest
•
See fig. 010510010.
The height adjustment can be done as follows:
•
Loosen the wing nut (A) a few turns.
•
Slide the headrest (B) to the desired height.
•
Securely tighten the wing nut again so that the headrest
cannot shift.
XXXXXX-010510010.en.doc
2.9.2
Adjusting the depth of the headrest
•
See fig. 010510020.
The depth adjustment should be done as follows:
•
Loosen the two bolts (A) a bit with a spanner with a key
width of 10 mm.
•
Set the desired headrest depth (B).
•
Tighten the two bolts securely again.
XXXXXX-010510020.en.doc
A
C
B
A
B
B
A
