USER MANUAL
19
Appendix 1
Code: Meaning:
r No charge current.
Self help action:
Make sure that power supply is switched
on from mains. If it is contact your dealer
or Handicare.
Code: Meaning:
o The main control board
has a memory problem.
Self help action:
Contact your dealer or Handicare.
Code: Meaning:
P Powered swivel
did not respond.
Self help action:
Contact your dealer or Handicare.
P
Code: Meaning:
U Faulty power supply.
Self help action:
Contact your dealer or Handicare.
U
Code: Meaning:
y The main control board
has a software fault.
Self help action:
Contact your dealer or Handicare.
Code: Meaning:
N/A Over current.
Self help action:
Contact your dealer or Handicare.
Code: Meaning:
N/A Lift is in “sleep mode” to
conserve battery power.
Self help action:
Press toggle or handset button to wake lift.
.8.
Note: If the display is showing
anything but the diagnostic
codes listed it requires resetting.
Drive the lift off the charge contacts.
Turn the main switch on the unit off
for 10 seconds and then back on.
