GB
74
Installing the surround
Handöl 33T
s 5NPACKTHESURROUNDKITANDSOAPSTONEKITFROMTHE
packaging.
s 2EADTHROUGHTHEWHOLESECTIONREGARDINGINSTALLINGTHE
surround. Satisfy yourself that no components are missing
or were defective on delivery. Handle the soapstone with
care. In particular sharp edges are vulnerable to knocks.
s 0LACETHESTOVEONTHEHEARTHPLATEANDCHECKTHE
installation distances.
1
2
Place the soapstone holders and back plate in the lugs on the
cast iron foot and attach them to the top frame.
Important! If the stove is to be rear connected
this must be done before the soapstones are hung
in position. If the stove is to be top connected this
must be carried out before the whole surround is
installed.
Apply beads of silicone to the edge between the profiles
and the support plates. Carefully hang the two lower
stones in place. Note that the lower stones have a
rounded edge which is turned downwards unlike the
upper stones which have bevelled edges both upwards
and downwards.