GB
88
403882
403881
403880
403877
403878
403879
403872
403871
403870
403867
403868
403869
TILE
Lower side stone
H26T High/H26K High
Installing tiles
Assembly
Soapstone and tile stoves are installed in
more or less the same way. These illustrations
show installation of a soapstone model, along
with smaller illustrations of corresponding
tiles and profiles.
Installing soapstone
For the tile model, first screw two profiles firmly
into the lower side plates. Insert them in the same
way as for the soapstone model.
Make quite certain that the rear side profiles
are vertically straight. Push in the lower side
stones from the front so that their suspension
plates hook into the horizontal keyholes of the
side profiles. Make sure that there is a 5 mm
gap between the stone and the lower edge of
the door.
General information
The stove must be placed on a level and horizontal surface to
ensure that the rows are even and straight, so that the tiles do
not become misaligned or the gaps between them too large.
While you are installing the stove, make sure that all the stones/
tiles are level and that each row is of uniform height along its
length.
Remember that the stones/tiles must be handled with care. They
are easily scratched and sharp edges are vulnerable to knocks.
You should also be careful not to crack the stones/tiles when
screwing in screws.
