-24-
ADJUSTMENTS
HORIZONTAL BEATER DRIVE CHAINS
Both beater drive chains can be adjusted by loosening bolts
(A) and sliding the poly tensioners toward the chain until
1/2” of deflection can be obtained on the opposite side (B).
Retighten the bolts (A) when deflection is obtained.
Shields Opened
for Clarity
BE SURE ALL SHIELDS ARE SECURED INTO
PLACE PRIOR TO RESTARTING MACHINE.
WHEEL HUBS
To adjust the wheel hubs, tighten the castellated nut on the spindle to the point where there is no
end-play and a slight drag on the bearings. Replace the cotter key with a new one of the correct size.
FAILURE TO FOLLOW THE RECOMMENDED
ADJUSTMENTS WILL VOID WARRANTY.
NOTE:
PERIODICALLY LUBRICATE ALL ROLLER
CHAINS WITH A LIGHT MACHINE OIL.
B
A
B
Summary of Contents for 4242
