-28-
LUBRICATION GUIDE
HORIZONTAL BEATER GEARBOX
Before using your new Manure Spreader, check the oil in the beater drive gearbox. Keep the gearbox filled
to the oil plug on the side of the gearbox as shown with Mobilube SHC 75W90 (or equivilant) gear lube.
CHECK PLUG
(Gearbox is located underneath rear of spreader)
(4) Zerks
(1) on the end of each Beater
The R.H. zerks are under the shield
(2) Zerks on Overrunning
Clutch (HB model)
Zerk
Behind
Shield on
bearing)
(1) Zerk on each
hub on all wheels
(2) Remote zerks for the main drive
shaft bearings under the spreader
(2) Remote zerks - one for each
tandem axle pivot
Vertical Beater Models
(2) Zerks - one for each
bearing on the top
of the vertical beaters
(1) Zerk on each
side for hydraulic
end gate pivot
Shields Removed for Clarity
(2) Zerks on Torque
Limiting Clutch (Drive-
line PTO in rear under
spreader VB model)
Summary of Contents for 4242
