manualshive.com logo in svg

Handspring Treo 90, User Manual

The Handspring Treo 90 offers a wide range of features to help you stay organized and connected on the go. From its vibrant color display to its built-in organizer and expandable memory slot, this handheld device is designed to enhance your productivity. Download the free user manual from 88.208.23.73:8080 to unlock the full potential of your Treo 90.

Share
Download
background image

Page 237

1995), and is provided to the U.S. Government only as commercial software (with “Restricted Rights”, if applicable).
Use, duplication, or disclosure by the U.S. Government is subject to restrictions set forth in this License Agreement
and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995), DFARS 252.227-7013(c)(1)(ii) (OCT
1988), FAR 12.212(a) (1995), FAR 52.227-19, or FAR 52.227-14 (ALT III), as applicable. 

TERM AND TERMINATION: This License Agreement is effective until terminated. You may terminate it at any time
by destroying the Software and documentation together with all copies and merged portions in any form. It will also
terminate immediately if you fail to comply with any term or condition of this License Agreement. Upon such termi-
nation you agree to destroy the Software and documentation, together with all copies and merged portions in any
form.

GOVERNING LAW: This License Agreement shall be governed by the laws of the State of California as such laws
are applied to agreements entered into and to be performed entirely within California between California residents
and by the laws of the United States. You agree that the conflicts of laws principles of such laws and the United
Nations Convention on Contracts for the International Sale of Goods (1980) are hereby excluded in its entirety from
application to this License Agreement. 

LIMITED WARRANTY; LIMITATION OF LIABILITY: All warranties and limitations of liability applicable to the Soft-
ware are as stated on the Limited Warranty or in the product manual accompanying the Software. Such warranties
and limitations of liability are incorporated herein in their entirety by this reference. 

SEVERABILITY: In the event any provision of this License Agreement is found to be invalid, illegal or unenforceable,
the validity, legality and enforceability of any of the remaining provisions shall not in any way be affected or impaired
and a valid, legal and enforceable provision of similar intent and economic impact shall be substituted therefor. 

ENTIRE AGREEMENT: This License Agreement sets forth the entire understanding and agreement between you
and Handspring, supersedes all prior agreements, whether written or oral, with respect to the Software, and may be
amended only in a writing signed by both parties. 

GNU Library General Public License

Version 2, June 1991 
Copyright (C) 1991 Free Software Foundation, Inc. 
59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. 

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. 

[This is the first released version of the library GPL. It is numbered 2 because it goes with version 2 of the ordinary
GPL.] 

PREAMBLE: The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free soft-
ware--to make sure the software is free for all its users. 

This license, the Library General Public License, applies to some specially designated Free Software Foundation
software, and to any other libraries whose authors decide to use it. You can use it for your libraries, too. 

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs; and that you know you can do these things. 

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the li-
brary, or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give
the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code.
If you link a program with the library, you must provide complete object files to the recipients so that they can relink
them with the library, after making changes to the library and recompiling it. And you must show them these terms
so they know their rights. 

Summary of Contents for Treo 90































































































































































































































































Reviews:

No comments

Related manuals for Treo 90

Amtek U560 User Manual preview
U560
Brand: Amtek Pages: 43
Opticon IRU1300 User Manual preview
IRU1300
Brand: Opticon Pages: 24
Speedata TT35 Quick Start Manual preview
TT35
Brand: Speedata Pages: 17
Sami WS-2330 User Manual preview
WS-2330
Brand: Sami Pages: 4
Motorola F3129A User Manual preview
F3129A
Brand: Motorola Pages: 38
Motorola F3124A User Manual preview
F3124A
Brand: Motorola Pages: 44
Motorola F4705A Quick Start Manual preview
F4705A
Brand: Motorola Pages: 72
Motorola FR6070Enterprise User Manual preview
FR6070Enterprise
Brand: Motorola Pages: 68
Motorola 7545MBW User Manual preview
7545MBW
Brand: Motorola Pages: 306
Motorola F4707A User Manual preview
F4707A
Brand: Motorola Pages: 224
Sharp Zaurus SL-5500 Service Manual preview
Zaurus SL-5500
Brand: Sharp Pages: 84
Sharp Zaurus SL-C3000 Instruction Manual preview
Zaurus SL-C3000
Brand: Sharp Pages: 212
Sharp Zaurus SL-5500 Operation Manual preview
Zaurus SL-5500
Brand: Sharp Pages: 148
Sharp UP-X200 Hardware Operation Manual preview
UP-X200
Brand: Sharp Pages: 49
Motorola Workabout Pro4 Quick Start Manual preview
Workabout Pro4
Brand: Motorola Pages: 2
Motorola MC9094 Manual preview
MC9094
Brand: Motorola Pages: 2
Motorola FR6874 User Manual preview
FR6874
Brand: Motorola Pages: 109
Motorola LEX L10i User Manual preview
LEX L10i
Brand: Motorola Pages: 186

Brands by name

Popular brands

Load more brands