MOD. FT04 rev.01
HELP V (use and maintenance) Ed. 3 - updated: 12/2018
-
10
–
4. Manual emergency system
THIS OPERATION CAN BE CARRIED OUT ONLY ONCE, SO IT IS COMPULSORY
TO CONTACT AS QUICKLY AS POSSIBLE THE NEAREST HANDYTECH CENTRE
.
.
It is necessary to unscrew anticlockwise, using a L hex key 6mm, the cap located on the electric
actuator. Remove it (
Photo 22)
.
Then use one more time the 6mm hex key (
Photo 23)
.
Photo 22 Photo 23
Rotate clockwise to carry out the way up of the lifter, and anticlockwise for the way down. Pay
attention to the limit switches: in this condition they are non working, so it is necessary to stop the
lifter in the desired position (this will not be done automatically).
Summary of Contents for FT04
Page 1: ......
