Step 6
Assemble the Handles (FF-1140) onto the A-Frame (FF-1100)
Bolts/Nuts may come pre-assembled in the Handles. Simply unscrew to remove.
• Insert the Handles (FF-1140) into the A-Frame (Figure 18).
• From the rear of the A-Frame, insert the Chicago Nut (IA-1148) through the corresponding 1/4” hole, located on the
Handle Housing (Figure 19).
• From the front of the A-Frame, insert the Chicago Bolt (IA-1148) (Figure 19) and tighten using the wrenches provided.
Attach the Hinge Covers (F1-1250) to the Hinge Plates.
Hex Bolts may come pre-assembled in Hinge Covers. Simply unscrew to remove.
• Select the corresponding Hinge Cover for the left or right side of the A-Frame by aligning each with the shape
of the Hinge Plate (Figure 20).
• Secure with two (2) Hex Bolts (H1-1202) for each side using the 10/13mm Wrench (F5-1088) provided.
Be careful not to overtighten.
Step 7
Chicago Nut
1
Hinge Cover
1
1
Figure 18
Figure 19
Figure 20
1
2
Chicago Bolt
2
Hex Bolts
2
2
