50
Parts Needed
Tools and Adhesives Needed
Section 19: Application of Decals and Scale Detailing
Fuselage
Wing
Scissors
Ruler
Note:
Refer to the box as reference for decal placement.
Placement of Decals:
Step 1.
Locate the decal sheet provided in the kit.
Step 2.
Trial fit the decals in position before removing the decal
backing. Once you’re satisfied with the location, proceed to
remove the backing and apply the decal. Use a soft cloth to rub
out any bubbles in the decal. You can also use window cleaner
applied to the surface to help position the decal.
Instrument Panel
Step 3.
An instrument panel can be installed in the Taylorcraft’s
cockpit. A decal is provided for this purpose, or a ready-made
instrument panel Hangar 9 is also available. To install the
instrument panel decal, trim and trial fit to the fuselage former
above the fuel tank where the front windshield is mounted.
Finishing the cockpit and Installing Pilot’s Seat
Step 4.
Before installing the scale seat, you will need to mount
the seat rails to the floor of the cockpit. Once mounted, paint the
interior of the fuselage cockpit a matching white color. We used
Tamiya’s acrylic white paint. The throttle linkage covering was
painted a light gray color. After the paint dries, attach strips of
velcro to the two rails and to the bottom of the scale seat. The
velcro will be used to hold the seat in place and make it easily
removable if necessary. The seat can also be glued in place.
(Step 4 photo)
Step 5.
Glue the gray foam seat cushions to the seat using
silicone glue or similar adhesive.
Step 6.
Mount the seat to the seat floor rails using the Velcro
®
strips to hold it in place.
Pilot
Step 7.
A full body pilot can be added to the cockpits to
provide a more realistic appearance.
Decals
Pilot (optional)
Summary of Contents for Clipped-wing Taylorcraft
Page 55: ...55 Notes ...