24
Section 10 – Landing Gear Installation
Required Parts
• Fuselage
• Landing gear fairing
• 10-32 x 1" socket head bolt (4)
• 10-32 nylon lock nut (4)
• #10 lock washer (4)
• 1/4-20 x 2” nylon bolt
Required Tools and Adhesives
• Hobby knife
• 5/32" hex wrench
• Adjustable wrench (small)
Step 1
Install the axles in the landing gear. Secure the
axles using an adjustable wrench and the nuts
provided with the axles.
Step 2
Install the landing gear using four 10-32 x 1" socket
head bolts, four #10 lock washers and four
10-32 nylon lock nuts. (The lock nuts are placed
inside the fuselage.)
Step 3
Press the landing gear fairing into position to transfer
the location of the bolt heads into the foam. Use a
hobby knife to remove the foam to provide clearance
for the heads of the bolts.
Step 4
Attach the landing gear fairing using a 1/4-20 x 2"
nylon bolt.