40
Step 18
The weight box is attached to the fuselage using two
4-40 x 1
1
/
4
-inch socket head screws and two #4
washers. It will be necessary to add weight when
balancing your model.
Step 19
Attach the muffler to the engine. Connect the lines
from the fuel tank to the carburetor and muffler. Note
that the red tube attaches to the muffler, and the blue
to the carburetor.
Note
: We used a fuel dot (HAN115) to allow
fueling the tank from outside the cowling.
Hint
: Use a Remote Glow Plug Adapter
(HAN3025) to allow starting the
engine without cutting a hole in the
dummy motor for the glow igniter.
Summary of Contents for fokker D.VII
Page 53: ...53 Building and Flying Notes ...